Mini round PE


Mini round PEMini round PE

Closures & colours


Srewcap + lining BS01. Appropriate to: 5, 10 ml.Spoutcap BS02. Appropriate to: 5, 10 ml.Srewcap + lining BS01. Appropriate to: 5, 10 ml.
.

Labels


etiketten voor PET flessen
.
 

Specifications Mini round PE bottles


The Mini Round is a traditionally and practically designed plastic bottle series. The round mini bottles with sloping shoulders have a 7 mm neck opening on which a screw top with inset and nozzle cap fits. The Mini Round can be used in many contexts such as, for example, cosmetics, pharmaceuticals, cleaning and chemical technical products. And it is also very suitable for use as sample bottles.

From 25 pcs.
Naturel (semi transparant)



* Height is an indication due to the diversity of closures and/or neck finishes.

* Click on closure(s) for possible colours.


Offer and/or Sample request  »

Mini round PE including closure

  25501002505007501000
5ml£ 46,76£ 54,38£ 69,60£ 97,88£ 152,25£ 206,63£ 252,30
10ml£ 46,98£ 54,81£ 70,47£ 100,05£ 156,60£ 213,15£ 261,00

From 1000 price on request
Prices including standard screwcap
Some closures surcharge applies, prices on request
Prices are excluding VAT but transport to one address in the UK is included.

Mini round PE including pump

From 1000 price on request
Prices including standard screwcap
Some closures surcharge applies, prices on request
Prices are excluding VAT but transport to one address in the UK is included.

PETE or PET

PET is a hard and glass clear Plastic with a high gloss surface. PET offers a very good Water and Oxygen barrier and has a high rupture and impact resistance. PET is commonly used for carbonated beverage bottles. PET provides very good alcohol and essential oil barrier properties, and a generally good chemical resistance. Acetones and ketones however will attack PET.

Food approved
Max.Hotfill 60ºC
Density (gr/cc): 1,36

RPETE or RPET

RPET is a hard and transparent Plastic with a high gloss surface. Due to the addition of additives to the virgin material, a light yellow shade can arise after recycling. By mixing clear transparent and blue transparent collected bottles, a light gray shade can occur after recycling. When recycled properly RPET has the same mechanical properties as virgin PET, meaning that PET offers a very good Water and Oxygen barrier and has a high rupture and impact resistance. PET is commonly used for carbonated beverage bottles. PET provides very good alcohol and essential oil barrier properties, and a generally good chemical resistance. Acetones and ketones however will attack PET.

Food approved
Max.Hotfill 60ºC
Density (gr/cc): 1,36

PP

PP is a rigid and transparent Plastic with a glossy surface. PP offers a high moisture and oxygen barrier but lacks impact resistance, especially at low temperatures. PP is used primarily for jars and closures. One major advantage of PP is its stability at high temperatures, up to 200° F. Polypropylene is autoclavable and offers the potential for steam sterilization. PP has excellent chemical resistance and is suitable for essential oils.

Food approved
Max.Hotfill 90ºC
Density (gr/cc): 0,91

HDPE

HDPE is a firm and semi transparent Plastic with a matt surface. HDPE offers a good Water and Oxygen barrier and has good rupture and impact resistance. HDPE is the most widely used resin for plastic bottles. It is compatible with a wide range of chemical products including acids and caustics, but is not compatible with solvents and essential oils. HDPE provides good protection at below freezing temperatures, supplied in FDA approved food grade.

Food approved
Max.Hotfill 65ºC
Density (gr/cc): 0,94

LDPE

LDPE is a soft and transparent Plastic with a glossy surface. LDPE offers a good Water and Oxygen barrier and has good rupture and impact resistance. LDPE is similar to HDPE but more flexible and therefore mostly used for Squeeze bottles and tubes. It is less compatible than HDPE for use of chemical products and not compatible for use with solvents and essential oils.

Food approved
Max.Hotfill 65ºC
Density (gr/cc): 0,915 - 0,925

SAN

SAN is crystal clear hard plastic with a glossy surface. SAN is a copolymer consisting of styrene and acrylonitrile. SAN is widely used as an alternative to polystyrene because of the higher heat resistance, more than 100C. The addition of Acrylonitrile ensures improved mechanical properties (break resistant) and chemical resistance.

Food approved
Max.Hotfill 100ºC
Density (gr/cc): 1,06 - 1,12

.